LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System And Remote Functions >> Diagnostic Information and Procedures >> Keyless Entry System Inoperative >> Circuit/System Verification

Circuit/System Verification

NOTE: The diagnostic assumes the transmitter worked with the vehicle at one time.
  1. Place the transmitter on the J 43241  test pad and press each transmitter button one at a time. The tester should sound a tone and illuminate a green light with each button press. See Special Tools .
    • If one or more buttons do not function, replace the transmitter battery and retest with the J 43241  . If the condition continues after battery replacement, replace the transmitter. See Special Tools .
  2. Operate the transmitter function while observing the vehicle. The vehicle should perform each of the corresponding functions selected on the transmitter.
    • If any function does not work, program the keyless entry transmitter, refer to Remote Control Door Lock Transmitter Programming . If any function still does not work after reprogramming, replace the transmitter. If any function still does not work after replacing the transmitter, replace the RCDLR.
scientia non olet · About LEMON Manuals