LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe GT, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L (Lax) - Introduction >> Repair Instructions >> Camshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing Camshaft Position Sensor O-Ring
    GM2016538Courtesy of GENERAL MOTORS CORP.
  1. Install camshaft position sensor.
  2. Apply a light coat of engine oil to the O-ring of the sensor.
    3. NOTE: Refer to Fastener Caution .
    Fig 2: Exploded View Of Camshaft Position Sensor & Bolt
    GM2016536Courtesy of GENERAL MOTORS CORP.
  3. Install the camshaft position sensor with the bolt.

    Tighten:  9.0 N.m (80 lb in)

  4. Connect the camshaft position sensor connector.
  5. Install air cleaner cap sub-assembly with hose.
  6. Inspect for engine oil leak.
  7. Install engine cover.
scientia non olet · About LEMON Manuals