LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 1.8 8, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 1.8L (Lay) - Introduction >> Repair Instructions >> Ignition Coil Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Bolts And Ignition Coils
    GM2016643Courtesy of GENERAL MOTORS CORP.
    NOTE: When installing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.
    NOTE: Refer to Fastener Caution .
  1. Install the 4 ignition coils with the 4 bolts.

    Tighten:  Tighten the bolts to 9.0N.m (80 lb in)

    2. Fig 2: Locating Ignition Coil Connectors
    GM2016641Courtesy of GENERAL MOTORS CORP.
  2. Connect the 4 ignition coil connectors.
  3. Install the engine cover. Refer to Engine Cover Replacement .
scientia non olet · About LEMON Manuals