LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 1.8 8, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System & Fuel System - 2.4L (Lax) - Introduction) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    NOTE: Refer to Fastener Caution .
    Fig 1: Identifying Accelerator Pedal Assembly Components
    GM2016531Courtesy of GENERAL MOTORS CORP.
  1. Install accelerator pedal assembly.
  2. Install the accelerator pedal assembly with the 2 bolts.

    Tighten:  5.5 N.m (49 lb in)

  3. Install the accelerator pedal assembly connector.
scientia non olet · About LEMON Manuals