LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Engine Cooling System) >> Repair Instructions >> Fan Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. If a fan assembly fails, inspect the hub and the drive components. A fan assembly may fail due to an imbalance in the hub. This type of failure may not be the fault of the blades.
    2. CAUTION: If a fan blade is bent or damaged, do not repair and use the damaged part. Replace a bent or damaged fan assembly with a new fan assembly. Using a fan with a different diameter, pitch, number of blades, or type of blade material may effect the cooling efficiency, performance and engine noise level.
  2. Remove the fan clutch assembly. Refer to Fan Clutch Replacement .
    3. Fig 1: Identifying fan to fan clutch retaining bolts
    GM1732054Courtesy of GENERAL MOTORS CORP.
  3. Remove the fan to fan clutch retaining bolts.
  4. Remove the fan from the fan clutch.
scientia non olet · About LEMON Manuals