LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Torrent Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Lighting Systems) >> Repair Instructions >> Ambient Light Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Access Panel Covers
    GM1344269Courtesy of GENERAL MOTORS CORP.
  1. Remove the access panel covers from the upper trim pad.
  2. Remove the I/P cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
  3. Remove the windshield garnish moldings. Refer to Windshield Upper Garnish Molding Replacement in Interior Trim.
    4. Fig 2: Removing/Installing Upper Trim Pad
    GM1407410Courtesy of GENERAL MOTORS CORP.
  4. Remove the upper trim pad bolts.
  5. Lift the upper trim pad to disengage the clips.
    6. Fig 3: View Of Ambient Light Sensor At I/P Upper Trim Panel
    GM1344270Courtesy of GENERAL MOTORS CORP.
  6. Twist the ambient light sensor to remove the sensor from the upper trim pad.
  7. Disconnect the electrical connector from the ambient light sensor.
scientia non olet · About LEMON Manuals