Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Install the lamp assembly to the bumper.
- Install the nut to the lamp and tighten to 2 N.m (18 in lb).
- Connect the electrical connector to the lamp assembly.
CAUTION:
Refer to Fastener Caution
.