Installation Procedure
- Install the generator (2).
- Install the generator bolts (1) and tighten to 50 N.m (37 lb ft).
- Install the engine wiring harness terminal lead (3) to the generator.
- Install the generator terminal nut (2) and tighten to 20 N.m (15 lb ft).
- Position the engine wiring harness boot (4).
- Connect the engine wiring harness electrical connector (1) to the generator.
- Install the drive belt. Refer to Drive Belt Replacement .
- Install the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution
.