Installation Procedure

Fig 1: View Of Battery Cables & Terminal Nut

GM1822394

Courtesy of GENERAL MOTORS CORP.

Install the negative battery cable lead (1) to the battery.

CAUTION: Refer to Fastener Caution .

Tighten the negative battery cable terminal nut to 17 N.m (13 lb ft).

Fig 2: View Of Battery Shield

GM1822392

Courtesy of GENERAL MOTORS CORP.

Install the battery shield retainer tabs to the battery tray.

Fig 3: View Of Battery Shield Rear Snap Retainers

GM1822391

Courtesy of GENERAL MOTORS CORP.

Engage the battery shield rear snap retainers (1).

Fig 4: View Of ECM Retainer & Top Of Battery Shield

GM1822389

Courtesy of GENERAL MOTORS CORP.

Carefully position the ECM and retainer to the top of the battery shield.
Slide the ECM retainer forward, engaging the retainer to the battery shield.
Reset all of the customers radio station presets.