LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Torrent Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 3.6L - Introduction) >> Repair Instructions >> Secondary Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Level Sensor (Secondary)
    GM1226425Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sender unit and float onto the fuel pump module. Make sure that the sender cap snaps into place.
  2. Connect the fuel level sender unit and the float electrical connector.
  3. Install the fuel pump module into the fuel tank. Refer to Secondary Fuel Tank Module Replacement .
scientia non olet · About LEMON Manuals