Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of License Plate Lamp Assembly & Screws

Courtesy of GENERAL MOTORS CORP.

Press the license plate lamp bulb into the lamp socket until seated.
Install the license plate lamp bulb socket assembly (1) in the license plate lamp lens and rotate clockwise until seated.
Align license plate lamp assembly with the license plate lamp bezel.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the license plate lamp assembly to license plate lamp bezel screws (2).
Tighten: Tighten the screws (2) to 4 N.m (35 lb in).