Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
- Disconnect the electrical connector from the stop lamp switch.
- Remove the retainer from the brake pedal pin.
- Remove the stop lamp switch and the pushrod to the power brake booster from the brake pedal pin.
- Unsnap the stop lamp switch from the power brake booster pushrod.
WARNING:
Refer to Battery Disconnect Warning
.