Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the screws holding the retaining ring to the headlamp housing assembly.
- Remove the retaining ring from the position lamp.
- Remove the headlamp capsule (1) from the position lamp.
- Remove the bulb (4) and socket from the rubber grommet in the lamp capsule.
- Push in on the side of the bulb (4) and turn the bulb 1/4 turn counterclockwise.
- Remove the bulb (4) from the socket.