Removal Procedure

WARNING: Refer to Cracked Window Warning .

NOTE: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.

Open the liftgate.
Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
Disconnect the electrical connectors from the liftgate window defogger bus bar.

WARNING: Refer to Defroster Outlet Warning .

Cover the following parts to protect from broken glass:
- Upper dash pad
- Defroster outlets and A/C outlets
- Seats and carpeting

WARNING: Refer to Glass and Sheet Metal Handling Warning .

NOTE: Keep the cutting edge of the tool against the window.

Remove the liftgate window from the urethane adhesive.
- Leave a base of urethane approximately 2 mm (0.078 in) on the pinch-weld flange.
- The only suitable lubrication is clear water.
- Use J 24402-A , J 39032 or equivalent in order to remove the window. See Special Tools .

Fig 1: View Of Liftgate Window

Courtesy of GENERAL MOTORS CORP.

With the aid of an assistant, remove the liftgate window (1) from the vehicle.