LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Solstice Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Antilock Brake System With Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> StabiliTrak Indicator Malfunction >> Circuit Verification

Circuit Verification

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. With a scan tool command the IPC display test ON and OFF. The stabilitrak indicator should turn ON and OFF.
    • If the stabilitrak indicator does not turn ON and OFF, replace the IPC.
  2. Observe the scan tool BCM Traction Control Switch parameter while pressing and releasing the traction control switch. The reading should change between Active and Inactive.
scientia non olet · About LEMON Manuals