Defog Indicator
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the X2 harness connector at the HVAC control module.
- Install a 5-amp fused jumper wire between control terminal A7 and 12 volts. Install a jumper wire between the ground terminal A5 and ground. Verify the defog Indicator illuminates.
- If the defog indicator does not illuminate, replace the HVAC control module.