LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Solstice Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Fixed And MOVEABLE Windows System) >> Diagnostic Information and Procedures >> Power Windows Malfunction (Sedan) >> Component Testing >> Rear Passenger Window Switch

Rear Passenger Window Switch

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the appropriate window switch.
  2. Test for infinite resistance between the control terminals F and G and the control terminal A with the switch in the INACTIVE position.
    • If less than the specified value, replace the window switch.
  3. Test for less than 2 ohms between the control terminal G and the control terminal A with the switch in the UP position.
    • If greater than the specified range, replace the window switch.
  4. Test for less than 2 ohms between the control terminal F and the control terminal A with the switch in the DOWN position.
    • If greater than the specified range, replace the window switch.
scientia non olet · About LEMON Manuals