CD, DVD, and PC Card Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

If the display will not open, use this procedure to manually open the display and remove the DVD, CD, or the card.

Remove the audio-navigation unit from the vehicle (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).
On the bench, carefully pull the display (A) straight out (about 1/2 inch).

Fig 1: Pulling Display
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fold down the display as shown.

Fig 2: Folding Down Display
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Push the PC card eject button (A) to eject the customer's PC card (if installed). Power is not required for this function.

Fig 3: Identifying PC Card Eject Button And Plastic Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Open the plastic cover (B) for the navigation DVD slot. Do not remove the plastic cover.
With the display open, temporarily reconnect the unit in the dash (to power it up).
Push the CD eject button (C), and navigation DVD eject button (D) and remove the discs (hold the discs by their edges to avoid fingerprints). To avoid scratches, place the navigation DVD and the customer's CD in a jewel case if available.
Close the plastic cover that hides the navigation DVD slot.
Close the display by first returning the display to the upward position, and then pushing the entire display straight back into the unit.
After installing the new audio-navigation unit, re-insert the navigation DVD, the customer's CD, and the PC card.