Rocker Arm Oil Pressure Sensor A Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine cover (see step 2 IGNITION COIL REPLACEMENT ).
Disconnect the rocker arm oil pressure sensor A connector (A).

Fig 1: Rocker Arm Oil Pressure Sensor A Connector With Torque Specifications And Rocker Arm Oil Pressure Sensor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove rocker arm oil pressure sensor A (B).
Install rocker arm oil pressure sensor A in the reverse order of removal with a new O-ring (C).