Setup for Component Replacement For 2.4L Engine Only

The replacement of some components will require a setup procedure for complete repair.

If any of the following components are replaced, a CKP Variation Learn Procedure must be performed. Refer to Crankshaft Position System Variation Learn .

• Engine replacement
• Any engine repair that disturbs the CKP sensor or it's relationship with the crankshaft reluctor wheel
• CKP sensor

• If the throttle body is replaced or a throttle body cleaning procedure is completed, the Throttle/Idle Learn Procedure must be performed. Refer to the following:

• Throttle/Idle Learn for the 2.0L
• Throttle/Idle Learn for the 2.4L