LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Solstice Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Removal Procedure

Removal Procedure

    NOTE: It is not necessary to remove the upper steering column trim cover. Only disengage it and leave it loose on top of the steering column.
  1. Disengage the upper steering column trim cover from the lower steering column trim covers.
  2. Remove the left lower steering column trim cover. Refer to Steering Column Trim Cover Replacement .
  3. Remove the driver knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement (SKY) or Driver Knee Bolster Bracket Replacement (Solstice) .
  4. Remove the steering column upper support bracket nuts.
  5. Loosen but do not remove the steering column lower support bracket bolt.
  6. Lower the steering column as needed to gain access to the turn signal multifunction switch.
  7. Disconnect the turn signal multifunction switch electrical connector.
    8. Fig 1: Identifying Multifunction Turn Signal Switch
    GM1551345Courtesy of GENERAL MOTORS CORP.
  8. Depress the locking tabs and remove the turn signal multifunction switch (1).
scientia non olet · About LEMON Manuals