LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 GXP, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 6.0L, 6.2L - Introduction >> Repair Instructions >> Fuel Injector Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Injector To Fuel Rail Assembly Retaining Clips
    GM1950742Courtesy of GENERAL MOTORS CORP.
  1. Apply a small amount of clean motor oil to the O-rings (3) and (5), before installing the new fuel injector.
  2. Install the NEW injector upper O-ring seals (3) to the injectors.
  3. Install the NEW injector lower O-ring seals (5) to the injectors.
  4. Install the fuel injector (4) in the fuel rail (1).
  5. Install the retaining clips for the fuel injector (3).
  6. Install the fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement .
    1. Turn the ignition switch ON for 2 seconds.
    2. Turn the ignition switch OFF for 10 seconds.
    3. Turn the ignition switch ON.
    4. Inspect for fuel leaks.
scientia non olet · About LEMON Manuals