LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 GXP, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 6.0L, 6.2L - Introduction >> Repair Instructions >> Spark Plug Wire Replacement >> Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement .
    2. Fig 1: Identifying Ignition Coil & Spark Plug Wire
    GM1950746Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the spark plug wire (2) to the spark plug.
    • Twist each spark plug boot 1/2 turn.
    • Pull only on the boot in order to remove the wire from each spark plug.
  3. Disconnect the spark plug wire from the ignition coil (1).
    • Twist each spark plug boot 1/2 turn.
    • Pull only on the boot in order to remove the wire from the ignition coil.
scientia non olet · About LEMON Manuals