Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling .
- Remove the windshield garnish mouldings. Refer to Windshield Garnish Molding Replacement .
- Remove the sunshades from the headliner assembly. Refer to Assist Handle Replacement .
- Remove the passenger assist handle bolts from the headliner. Refer to Sunshade Replacement .
- Remove the lower centre pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
- Remove the upper centre pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
- Remove the rear upper quarter pillar trim panel. Refer to Quarter Upper Trim Panel Replacement .
- Remove the headliner assembly from the vehicle. Refer to Headlining Trim Panel Replacement .
- Remove the inflatable restraint roof rail module to body retaining bolts (A to I) in the sequence of A through to I.
- Detach the inflatable restraint roof rail module to body retaining clips (1) from the body (2).
- Disconnect the electrical connector (1) from the inflatable restraint roof rail module (2).
- Disengage the inflatable restraint roof rail module supporting hook (1) from the body (2).
- With the aid of an assistant remove the inflatable restraint roof rail module (3) from the vehicle.
For deployment procedure. Refer to Inflator Module Handling and Scrapping .
WARNING:
Refer to SIR Warning
.
WARNING:
Refer to SIR Inflator Module Handling and Storage Warning
.
NOTE:
Removal of the inflatable restraint roof rail module to body retaining bolts (A-I) should be performed in sequence.
NOTE:
The inflatable restraint roof rail module flute channel must not be twisted during removal or installation procedures