Installation Procedure
- Install the seat frame bracket (3) onto the seat frame (4) using NEW seat frame bracket retainers (5).
- Install the passenger presence control module (2) into the seat frame bracket (3), engaging the retention tabs (1).
- Connect the passenger presence electrical connector (1).
- Install the seat cushion cover. Refer to Front Seat Cushion Cover and Pad Replacement .
- Install the seat adjuster. Refer to Front Seat Adjuster Replacement .
- Install seat back assembly. Refer to Front Seat Back Replacement .
- Install the seat outer trim cover. Refer to Seat Cushion Outer Trim Panel Replacement .
- Install the front seat belt tensioner.
- Install the front seat back adjuster. Refer to Front Seat Recliner Knob Replacement .
- Install the front seat heater module. Refer to Front Seat Heater Control Module Replacement .
- Install the front seat. Refer to Front Seat Replacement - Bucket .
- Enable the SIR system. Refer to SIR Disabling and Enabling .
- Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Programming and Setup .
NOTE:
The seat frame bracket retainers (5) are single use items and must be discarded after removal.
NOTE:
The retention tabs (1) must audibly engage to provide secure location of the passenger presence control module (2) into the seat frame bracket (3).
WARNING:
Refer to SIR Warning
.