Remote Control Door Lock Receiver Scan Tool Information
Remote Control Door Lock Receiver Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Fob 1 Battery | - | OK | The scan tool displays OK or Low. This is the state of the Fob 1 battery. |
| Fob 1 Function | - | None | The scan tool displays None. This is the state of the Fob 1 command as monitored by the RCDLR. |
| Fob 1 Programmed | - | Yes | The scan tool displays Yes or No. Yes is displayed if the Fob 1 is programmed into the RCDLR. |
| Fob 2 Battery | - | OK | The scan tool displays OK or Low. This is the state of the Fob 2 battery. |
| Fob 2 Function | - | None | The scan tool displays None. This is the state of the Fob 2 command as monitored by the RCDLR. |
| Fob 2 Programmed | - | Yes | The scan tool displays Yes or No. Yes is displayed if the Fob 2 is programmed into the RCDLR. |
| Fob 3 Battery | - | OK | The scan tool displays OK or Low. This is the state of the Fob 3 battery. |
| Fob 3 Function | - | None | The scan tool displays None. This is the state of the Fob 3 command as monitored by the RCDLR. |
| Fob 3 Programmed | - | Yes | The scan tool displays Yes or No. Yes is displayed if the Fob 3 is programmed into the RCDLR. |
| Fob 4 Battery | - | OK | The scan tool displays OK or Low. This is the state of the Fob 4 battery. |
| Fob 4 Function | - | None | The scan tool displays None. This is the state of the Fob 4 command as monitored by the RCDLR. |
| Fob 4 Programmed | - | Yes | The scan tool displays Yes or No. Yes is displayed if the Fob 4 is programmed into the RCDLR. |
| Last Fob Used | - | Varies | The scan tool displays None, Fob 1, Fob 2, Fob 3, Fob 4 or Fob 5. This was the last Fob used, as monitored by the RCDLR. |
| LF Pressure Sensor Mode | - | Varies | The scan tool displays Learn, Re-measure, Off, Stationary, Wake up, and Learn. This is the state of the left front pressure sensor. |
| LF Pressure Status | - | Normal | The scan tool displays Unknown, Normal, Low. This is the state of the left front tire pressure. |
| LF Tire Press. Sensor Status | - | Normal | The scan tool displays Normal Mode, Fault or Low Battery. This is the state of the left front tire pressure sensor. |
| LF Tire Press. Sensor Battery Status | - | OK | The scan tool displays OK or Low Battery This is the state of the left front tire pressure sensor battery |
| LF Tire Pressure | - | kPa (psi) | This displays kPa (psi). This is the amount of pressure in the left front tire. |
| LR Pressure Sensor Mode | - | Varies | The scan tool displays Learn, Re-measure, Off, Stationary, Wake up, and Learn. This is the state of the left rear pressure sensor. |
| LR Pressure Status | - | Normal | The scan tool displays Unknown, Normal, Low, Low. This is the state of the left rear tire pressure. |
| LR Tire Press. Sensor Status | - | Normal | The scan tool displays Normal Mode, Fault or Low Battery. This is the state of the left rear tire pressure sensor. |
| LR Tire Pressure | - | kPa (psi) | This displays kPa (psi). This is the amount of pressure in the left rear tire. |
| LR Tire Press. Sensor Battery Status | - | OK | The scan tool displays OK or Low Battery This is the state of the left rear tire pressure sensor battery |
| Rear Placard | - | Counts | This displays Counts. |
| Front Placard | - | Counts | This displays Counts. |
| RF Pressure Sensor Mode | - | Varies | The scan tool displays Learn, Re-measure, Off, Stationary, Wake up, and Learn. This is the state of the right front pressure sensor. |
| RF Pressure Status | - | Normal | The scan tool displays Unknown, Normal, Low, Low. This is the state of the right front tire pressure. |
| RF Tire Press. Sensor Status | - | Normal Mode | The scan tool displays Normal Mode, Fault or Low Battery. This is the state of the right front tire pressure sensor. |
| RF Tire Pressure | - | kPa (psi) | This displays kPa (psi). This is the amount of pressure in the right front tire. |
| RF Tire Press. Sensor Battery Status | - | OK | The scan tool displays OK or Low Battery This is the state of the right front tire pressure sensor battery |
| RR Pressure Sensor Mode | - | Varies | The scan tool displays Learn, Re-measure, Off, Stationary, Wake up, and Learn. This is the state of the right rear pressure sensor. |
| RR Pressure Status | - | Normal | The scan tool displays Unknown, Normal, Low, Low. This is the state of the right rear tire pressure. |
| RR Tire Press. Sensor Status | - | Normal | The scan tool displays Normal Mode, Fault or Low Battery. This is the state of the right rear tire pressure sensor. |
| RR Tire Pressure | - | kPa (psi) | This displays kPa (psi). This is the amount of pressure in the right rear tire. |
| RR Tire Press. Sensor Battery Status | - | OK | The scan tool displays OK or Low Battery This is the state of the right rear tire pressure sensor battery |
| Selected Front Tire Type | - | Varies | The scan tool displays, P-Metric (S). This is the type of rear tires used on the vehicle. |
| Selected Rear Tire Type | - | Varies | The scan tool displays, P-Metric (S). This is the type of rear tires used on the vehicle. |
| Tire Pressure Monitoring (TPM) System Enabled | - | Yes | The scan tool displays Yes or No. Yes is displayed if the TPM system is enabled. |
| TPM Indicator Message | - | On | The scan tool displays On or Off. On is displayed if the TPM Indicator Message is visible. |
| Off | |||
| Learn in Progress | - | Yes | The scan tool displays Yes or No. Yes is displayed if the TPM is in learn mode. |
| No | |||
Remote Control Door Lock Receiver Scan Tool Output Controls
| Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Key Fob Button Test | Special Functions | This program will erase all key fobs from memory and then begin reprogramming |