LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Lighting Systems) >> Repair Instructions >> Turn Signal Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Turn Signal Switch Retaining Tabs
    GM2041141Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Listen for an audible click from the retaining tabs (2) to confirm correct fitting.
  1. Install the turn signal switch (1) into the steering column (3).
    2. Fig 2: Identifying Turn Signal Switch Electrical Connector
    GM2041140Courtesy of GENERAL MOTORS CORP.
  2. Connect the turn signal switch electrical connector (1).
  3. Install the upper and lower steering column trim covers. Refer to Steering Column Trim Cover Replacement .
  4. Connect the battery negative cable to the battery. Refer to Battery Negative Cable Disconnection and Connection .
  5. Check all vehicle lights for correct operation.
scientia non olet · About LEMON Manuals