Installation Procedure
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Before transferring any parts perform the timing/synchronization of the sunroof frame. Refer to Sunroof Track Timing/Synchronization .
- Transfer all necessary parts to the new module.
- With the aid of an assistant, position the new sunroof module into the roof opening.
- With the aid of an assistant, install the bolts (1) that secure the sunroof module to the roof and tighten to 8 N.m (70 lb in).
- Connect the front and rear sunroof drain hoses. Refer to Sunroof Housing Front Drain Hose Replacement , and Sunroof Housing Rear Drain Hose Replacement .
- Connect the electrical connectors to the sunroof module.
- Install and adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment .
- Ensure the motor/actuator initialization/teach process has been done. Refer to Sunroof Motor/Actuator Initialization/Teach Process .
- Verify the proper operation of the sunroof before installing the headliner.
- Install the headliner. Refer to Headlining Trim Panel Replacement (With PLA) , Headlining Trim Panel Replacement (Without PLA) .
CAUTION:
Refer to Fastener Caution .