Cruise Control Inhibited

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

The engine control module (ECM) inhibits the cruise control operation when any of the following conditions exist:

The ECM has not detected a brake pedal activation from the body control module (BCM).
A cruise control related DTC has been set.
The antilock brake system/traction control system is active for more than 2 seconds.
The engine RPM is too low.
The engine RPM is too high.
The system voltage is not between 9-16 volts.
The vehicle speed is less than 40 km/h (25 mph).
The vehicle speed is too high.
The vehicle is in PARK, REVERSE, NEUTRAL, or 1st gear.