LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Fixed And MOVEABLE Windows System) >> Repair Instructions >> Windshield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to Adhesive Installation of Windshields .
    2. CAUTION: Refer to Fastener Caution .
  2. Install the windshield side reveal moldings screws.

    Tighten:  Tighten the windshield side reveal moldings screws to 2 N.m (18 lb in).

  3. Reposition the front door sealing weatherstrips to the pinch-weld flange.
  4. Install the push-pin retainers to the front door sealing weatherstrips located at the base of the windshield pillar.
  5. Install the cowl air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  6. Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (Traverse) or Windshield Wiper Arm Replacement (Acadia) or Windshield Wiper Arm Replacement (Enclave) or Windshield Wiper Arm Replacement (OUTLOOK) .
  7. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
  8. Install the rain sensor, if equipped.
  9. Close the hood.
  10. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals