Front Passenger Power Window Operation RPO AXE

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

The switch for the front passenger power window has 3 positions up, down, and express down and its position is a direct input into the passenger door module (PDM). When the passenger power window motor module receives LIN from the PDM, the passenger power window motor module will apply power and ground to the passenger door window motor to move the window as requested.

The front passenger power window can also be operated from the driver master control. The front passenger window switch on the driver master control has 3 positions UP, Down and Express Down and its position is a direct input into the DDM. Upon receiving a request for front passenger power window operation, the DDM transmits a GMLAN message indicating the changed switch position to the BCM which then sends a command to the PDM. When the PDM receives a passenger door window switch request from the BCM, it will send a command to the passenger power window motor module which will apply power and ground to the passenger door window motor to move the window as requested.