Component Testing
WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
It is recommended that component testing is performed before circuit testing when diagnosing infotainment unit functions.
- Turn the park lamps on.
- Connect the scan tool to the DLC and select Infotainment System / Audio System / Actuator Test / Display / Illumination .
- Ignition On, infotainment unit On.
- Using the Increase soft key on the scan tool, increase the illumination level to maximum.
- Check the display illumination is even with no dark patches, and the fascia control buttons are illuminated.
- To decrease the infotainment unit illumination, press the Decrease soft key on the scan tool. Check the fascia illumination decreases accordingly.
- Press the Quit soft key to exit the test.
- If the illumination function does not operate correctly, replace the infotainment unit.