LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC B1517 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connectors at the BCM.
  2. Ignition OFF, test for less than 3 Ω between the ground circuit terminal 9 X4 and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Ignition On, verify that a test lamp illuminates between the B+ circuit terminals listed below and ground.
    • Terminal 3 X3
    • Terminal 10 X4
    • If the test lamp does not illuminate, test the B+ circuits for a short to ground or an open/high resistance.
  4. If all circuits test normal, replace the BCM.
scientia non olet · About LEMON Manuals