LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Wheel Speed Sensor
    GM1943659Courtesy of GENERAL MOTORS CORP.
    WARNING: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.
    WARNING: Refer to Safety Glasses Warning .
    WARNING: Refer to Brake Dust Warning .
  1. Install the wheel speed sensor (2) to the knuckle (1).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the wheel speed sensor to knuckle retaining bolt (3) and tighten to 7 N.m (62 lb in).
    3. Fig 2: Identifying Wheel Speed Sensor Jumper Harness Electrical Connector
    GM1943660Courtesy of GENERAL MOTORS CORP.
  3. Connect the wheel speed sensor jumper harness electrical connector (1).
  4. Install the rear wheels. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals