LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> DTC C0131 >> Circuit/System Verification

Circuit/System Verification

  1. Apply and release brake pedal. Verify brake lamps operate properly.
  2. Ignition ON, observe the scan tool EBCM BPP signal parameter while applying and releasing the brake pedal. The reading should change between Applied and Released.
    • If the parameter does not change between applied and release, replace the BPMV/EBCM assembly.
scientia non olet · About LEMON Manuals