Installation Procedure

Fig 1: View Of Right Knock Sensor & Bolt

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Position the knock sensor and tighten the knock sensor bolt to 23 N.m (17 lb ft).

Fig 2: Identifying CKP Sensor & Knock Sensor

Courtesy of GENERAL MOTORS CORP.

Connect the engine wiring harness electrical connector (1) to the bank 1 knock sensor.
Instal the exhaust manifold lower heat shield. Refer to Exhaust Manifold Lower Heat Shield Replacement (LY7) .