LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G6 GXP, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Fuel Pump Module Wiring Harness Connectors
    GM1796271Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the fuel tank fuel pump module wiring harness electrical connector (2) from the fuel tank pressure sensor.
    3. Fig 2: View Of Fuel Tank Pressure Sensor
    GM1796299Courtesy of GENERAL MOTORS CORP.
  3. Gently pull upward in order to remove the fuel tank pressure sensor from the fuel tank module.
scientia non olet · About LEMON Manuals