LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L - Introduction >> Repair Instructions >> Accelerator Pedal with Position Sensor Assembly Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Accelerator Pedal Position Sensor Electrical Connector
    GM1544734Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the APP sensor bolts (1).
  3. Remove the APP sensor (2).
scientia non olet · About LEMON Manuals