LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G5 Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment System >> Repair Instructions >> Front Camber Adjustment

Front Camber Adjustment

    NOTE: If there is no adjustment for the camber, proceed to step 2.
  1. Loosen both strut to knuckle nuts just enough to allow for movement.
  2. Remove the strut assembly from the vehicle. Refer to Strut Replacement .
  3. Install the strut assembly in a soft jawed vise.
    4. Fig 1: Identifying Inner & Outer Holes
    GM2178346Courtesy of GENERAL MOTORS CORP.
    NOTE: The inner hole should NOT be enlarged beyond that of the outer hole.
  4. Using the appropriate tool, enlarge the inner hole (1) to match the outer hole (2).
  5. Install the strut assembly. Refer to Strut Replacement .
    6. Fig 2: Adjusting Front Camber
    GM165165Courtesy of GENERAL MOTORS CORP.
  6. Adjust the camber to specification by moving the top of the wheel in or out. Refer to Wheel Alignment Specifications .
scientia non olet · About LEMON Manuals