LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G3 Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> DTC C0121 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the EBCM connector.
  2. Measure for 0 ohms between the EBCM ground circuits and ground.
    • If more than 0 ohms, repair open or high resistance in ground circuit.
    • If all circuits test normal replace the EBCM.
scientia non olet · About LEMON Manuals