Installation Procedure
WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Install the side air bag sensor (1).
- Install the side air bag sensor mounting bolt and tighten to 10 N.m (89 lb in).
- Connect the side air bag sensor connector (2).
- Install the lower trim to the center pillar. Refer to Center Pillar Lower Trim Panel Replacement (Notchback) or Center Pillar Lower Trim Panel Replacement (Hatchback) .
- Connect the negative battery cable.
CAUTION:
Refer to Fastener Caution
.