Instrument Cluster Programming and Setup
WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
(All vehicles except Holden Barina)
IMPORTANT:
Before removing the instrument cluster to be replaced refer to Service Programming System (SPS) and under Special Functions select IPC Replacement (odometer setting).
The odometer value must be transferred, from the old cluster, to the new part using SPS.
The replacement IPC must be setup for vehicles with or without air conditioning using the scan tool Instrument Panel Cluster Module Setup menu.
The Holden Barina does not require programming.