LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Ball Joint Replacement >> Assembly Procedure

Assembly Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Ball Joint, Control Arm & Mounting Bolts
    GM1241982Courtesy of GENERAL MOTORS CORP.
  1. Connect the ball joint to the control arm with the mounting bolts.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the nuts to secure the bolts from below the control arm and tighten to 150 N.m (111 lb ft).
  3. Install the control arm. Refer to Control Arm Replacement .
  4. Install the front wheel. Refer to Tire and Wheel Removal and Installation .
  5. Remove the jackstands.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals