LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G3 Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (1.4L) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Valve Cover Breather Hose
    GM1241458Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to Battery Disconnect Warning .
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Disconnect the intake air temperature (IAT) sensor electrical connector from the air intake tube.
    3. Fig 2: Locating Intake Ducting To Engine
    GM1241530Courtesy of GENERAL MOTORS CORP.
  3. Remove the breather tube clamp and all other clamps to remove the air intake tube.
    4. Fig 3: View Of Generator Voltage Regulator
    GM1241861Courtesy of GENERAL MOTORS CORP.
  4. Remove the battery harness connector nut from the generator.
    5. Fig 4: View Of Alternator Bracket And Retaining Nut
    GM1241551Courtesy of GENERAL MOTORS CORP.
  5. Remove the generator shackle bracket bolt.
    6. Fig 5: View Of Serpentine Accessory Drive Belt Tensioner
    GM1241549Courtesy of GENERAL MOTORS CORP.
  6. Remove the serpentine accessory drive belt. For vehicles equipped with power steering and air conditioning.
    7. Fig 6: Removing/Installing Generator, Nuts And Bracket-To-Generator Bolts
    GM1241862Courtesy of GENERAL MOTORS CORP.
  7. Remove the nuts which hold the generator lower bracket-to-generator bolts.
  8. Carefully remove the generator.
scientia non olet · About LEMON Manuals