Installation Procedure

Fig 1: View of Inside Lock Rods From Door Handle and Lock

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the window regulator with the nuts.
Tighten: Tighten the window regulator nuts to 7 N.m (62 lb in).
Install the front door glass. Refer to Front Side Door Window Replacement .
Connect the negative battery cable.
If the vehicle is equipped with a one touch up function, and the driver side power window regulator has been replaced, perform the window motor reinitialization process. Refer to Power Window Reinitialization .