LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Wave Base, 4D Hatchback, D16/MLM >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System & Remote Functions >> Repair Instructions >> Remote Control Door Lock Receiver Replacement (Hatchback) >> Removal Procedure

Removal Procedure

    Fig 1: View of Control Module/Receiver
    GM1252096Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
    IMPORTANT: Remote keyless transmitters must be programmed when remote control module/receiver is replaced.
  1. Disconnect the negative battery cable.
  2. Remove the floor console. Refer to Front Floor Console Replacement (Notchback) or Front Floor Console Replacement (Hatchback) .
  3. Disconnect the control module/receiver electrical connector.
  4. Slide the control module/receiver away from its mounting bracket.
scientia non olet · About LEMON Manuals