Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect cable from negative battery terminal.
Remove air cleaner assembly with hose. Refer to Air Cleaner Element Replacement

Fig 1: Identifying Wire Harness Clamp

Courtesy of GENERAL MOTORS CORP.

Separate the wire harness clamp.

Fig 2: Pushing Locks On Levers, Raising Levers, And Disconnecting ECM Connectors

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the connectors.

Disconnect the 2 ECM connectors.
Push the locks on the 2 levers, then raise the levers, and disconnect the 2 ECM connectors.
Remove the 3 bolts and the ECM.

Fig 3: Identifying ECM Brackets Screws

Courtesy of GENERAL MOTORS CORP.

Remove the 4 screws and 2 ECM brackets.