LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 273 (Engine Control System & Fuel System - 1.8L (Lay) - Introduction) >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the engine coolant. Refer to Cooling System Draining and Filling .
  2. Remove the engine cover. Refer to Engine Cover Replacement .
  3. Remove the air cleaner cap sub-assembly with hose.
    4. Fig 1: Locating Engine Coolant Temperature Sensor Connector
    GM2016647Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the engine coolant temperature sensor connector.
    5. Fig 2: View Of Engine Coolant Temperature Sensor
    GM2016648Courtesy of GENERAL MOTORS CORP.
  5. Remove the engine coolant temperature sensor.
scientia non olet · About LEMON Manuals