LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 273 (Engine Control System & Fuel System - 1.8L (Lay) - Introduction) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Caution .
    Fig 1: Locating Accelerator Pedal Position Sensor Components
    GM2016531Courtesy of GENERAL MOTORS CORP.
  1. Install accelerator pedal assembly.
  2. Install the accelerator pedal assembly with the 2 bolts.

    Tighten:  5.5 N.m (49 lb in)

  3. Install the accelerator pedal assembly connector.
scientia non olet · About LEMON Manuals