Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Window Guide Channel, Bolts And Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Caution .

Install the window guide channel (1) to the rear door. Secure the guide channel with the 2 bolts (2) and the 2 screws (3).
Tighten: Tighten the window guide channel bolts to 8 N.m (71 lb in).
Install the rubber window run channel into the center guide channel.
Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .